Clean Your Cooler In 10 Simple Steps

(If you have a Hot & Cold Cooler, for these next steps, make sure you have blocked off the hot tank so no water will get in. We have corks we will provide you if you need one. The hot tank sanitizes itself, with the extreme heat, and allowing sanitizer in the tank will throw off of the flavor of the water for days!)

5. Prepare some sanitizer in a bucket, using one gallon
of water and one teaspoon of unscented bleach. Be
sure to use gloves, and let the sanitizer sit for a few
minutes.
6. Rinse the cooler thoroughly with fresh water, until all
sanitizer is removed.
7. Fill the reservoir with water, and drain through the
cold faucet. Repeat this two or three times, to be sure
all bleach is removed.
3. Drain all water from the cooler, by removing the
water bottle and draining all water in the reservoir
thru the faucets.

9. Remove cork from hot tank, and replace the baffle
and water-guard/spill free top. Try water from faucet
and make sure there is no chlorine taste.

10. Plug back in, and allow 30 minutes for water to get
hot/cold.